Grill Valueparts Spirit 200 Burner Flavorizer Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This grill valueparts spirit 200 burner flavorizer review covers a replacement kit designed for Weber Spirit 200 series grills. You get three flavorizer bars and three burner tubes in one package. The flavorizer bars measure 15.3 inches by 3.6 inches. The main burner tubes are 18 inches long, with crossover tubes at 10.5 inches. The entire kit weighs four pounds. It is available in enamel or stainless steel finishes. This spec-based look helps you determine if these dimensions match your current grill setup before you buy.
What stands out
- Three flavorizer bars and three burner tubes included in a single pack
- Flavorizer bars measure 15.3 by 3.6 inches for consistent heat distribution
- Main burner tubes are 18 inches long to fit standard 2-burner layouts
- Crossover burner tubes measure 10.5 inches for proper connection
- Weighs four pounds for easy handling during installation
Who it fits
Good fit for
You should buy this kit if you own a Weber Spirit 200 series grill with front-mounted controls from 2013 or newer. Models like the E-210, E-220, S-210, and S-220 are compatible. The specific dimensions ensure the parts fit without modification. If your burner tubes are cracked or your flavorizer bars are rusted, this kit restores the original cooking surface. It is ideal for owners who want OEM-style dimensions without paying for direct manufacturer parts.
Who should skip it
Do not use this kit if your Weber Spirit grill has side-mounted controls. This design applies to models from 2007 through 2012, which have different internal geometries. The parts will not fit correctly, leading to installation issues. Also, skip this if you have a Spirit 300 series grill. That model requires a three-burner configuration with different tube lengths. Ensure your control panel is in the front before ordering, as the dimensions are specific to the front-mount design.
Verdict: This kit provides correctly sized replacement parts for front-control Weber Spirit 200 series grills. It is a practical solution for restoring even heat distribution and protecting burner tubes from grease.
Key specs explained
Color: Spirit 200 Series 2 Burner Enamel
The enamel finish provides a durable surface that resists chipping and rust during outdoor use. This coating protects the metal from heat and moisture, extending the lifespan of your replacement parts. You can choose this option if you prefer a classic look that matches older grill models. Stainless steel is another available finish for a different aesthetic. Select the color that best fits your existing grill setup.
Model: REV200303-02KIT
This model number identifies the specific kit configuration for Weber Spirit 200 series grills. It ensures you receive the correct combination of three flavorizer bars and three burner tubes. Using the exact model number helps you verify compatibility with your grill before purchase. It distinguishes this kit from other variations like the Spirit 300 series. Check your grill manual or existing parts to confirm this model matches your needs.
Weight: 4 pounds
The kit weighs four pounds, which indicates a substantial build for replacement components. This weight suggests the parts are made from durable materials that can withstand high heat. Heavier parts often retain heat better, which can improve cooking performance. You can easily handle these components during installation or cleaning. Compare this weight with other replacement kits to gauge build quality and material thickness.
Flavorizer Bar Dimensions: 15.3 inches by 3.6 inches
These dimensions ensure the bars fit precisely over the burner tubes in Spirit 200 series grills. The size allows for even heat distribution across the cooking area. Proper fit prevents gaps that could lead to uneven cooking or flare-ups. Measure your existing bars if unsure, as side-mount models from earlier years have different sizes. Accurate dimensions are critical for maintaining the grill's original performance and safety standards.
Burner Tube Length: 18 inches main, 10.5 inches crossover
The main burner tubes are 18 inches long, and the crossover tubes are 10.5 inches. These lengths are designed to fit the specific layout of the Spirit 200 series. Correct tube length ensures proper gas flow and flame distribution. Shorter or longer tubes could cause ignition issues or uneven heating. Verify these measurements against your grill's internal structure to ensure a perfect fit before installation.
Build Quality and Design Specs
According to the listing, this kit comes in a Spirit 200 Series 2 Burner Enamel finish. This color option suggests a durable coating designed to resist chipping and rust during outdoor use. The enamel surface protects the metal from heat and moisture, which helps extend the lifespan of your replacement parts. You can choose this finish if you prefer a standard, weather-resistant look that blends with typical grill aesthetics. Alternative options include a stainless steel version for a different visual style, though the data does not detail the specific maintenance requirements for that variant.
The package weighs four pounds, making it manageable for one person to handle during installation. The layout includes three flavorizer bars and three burner tubes. The bars measure 15.3 inches by 3.6 inches, while the main burner tubes are 18 inches long. The crossover tubes are 10.5 inches. These specific dimensions ensure they fit Weber Spirit 200 series grills from 2013 onward with front-mounted controls. The design focuses on protecting the burner tubes from oil droplets to prevent clogging. This allows for a full and even flame, which contributes to consistent cooking performance. The bars also help evaporate collected oil, adding smoky flavor to your food. This practical design prioritizes function and compatibility over decorative features.
Setup And Daily Use Guide
Installing this kit requires basic tools and careful measurement. The package contains three flavorizer bars and three burner tubes. You must verify that your Weber Spirit 200 series grill has front-mounted controls. This fitment applies to models from 2013 onward, including the E-210, E-220, S-210, and S-220. It does not fit side-mount control models from 2007 to 2012. Check your existing part numbers against the list provided by the manufacturer. The flavorizer bars measure 15.3 inches by 3.6 inches. The main burner tubes are 18 inches long. The crossover tubes measure 10.5 inches. Ensure these dimensions match your grill’s internal space before purchase. Once installed, the flavorizer bars sit above the burners. They catch grease drippings and convert them into smoke. This process adds flavor to your food. The bars also protect the burner tubes from direct contact with oil. This protection helps prevent clogging of the burner holes. Clean the parts after each use. The enamel finish resists chipping and rust. This coating extends the life of the metal during outdoor cooking. The kit weighs four pounds. Handle the components gently to avoid bending the tubes. Proper alignment ensures even heat distribution. The burner covers allow flames to remain full and consistent. Regular maintenance keeps the grill performing at its best. Always confirm compatibility with your specific grill model before assembly. If you are unsure, contact the seller for assistance. The setup is straightforward if you have the correct parts. Daily use involves standard grilling procedures. The design supports consistent cooking results.
Before You Buy This Kit
You need to verify your grill has front-mounted controls. Side-mounted controls from 2012 or earlier are not compatible. Check your model number against the listed part numbers like 7635 and 68949. The kit includes three bars and three tubes. You may need basic tools for installation. Regular cleaning prevents grease clogging. Wipe the enamel finish after cooling. This kit fits alongside other Weber replacement parts in our outdoor cooking guide. It suits owners of Spirit 200 series grills who need direct burner and heat deflector replacements. Ensure your grill is cool before handling parts. The weight is four pounds. This makes handling easy. Consider if you need the stainless option instead of enamel. The choice depends on your preference for durability and appearance. This product is a spec-based replacement. It does not include grates or lids. You must buy those separately if needed. Always double-check dimensions before ordering to avoid fit issues.
Check before you buy
- Confirm your grill has front-mounted controls, not side-mounted.
- Verify your model matches Spirit 200 series from 2013 onward.
- Check part numbers 7635 and 68949 match your original parts.
- Ensure your grill is cool before installing replacement parts.
The product at a glance
Grill Valueparts Spirit 200 Burner and Flavorizer Bar Kit
Best for: Weber Spirit 200 series owners with front controls
- Weight
- 4 pounds
View on Amazon: Grill Valueparts Spirit 200 Burner and Flavorizer Bar Kit Affiliate link
This replacement kit includes three flavorizer bars and three burner tubes for Weber Spirit 200 and Spirit II 200 series grills. The flavorizer bars measure 15.3 inches by 3.6 inches, while the main burner tubes are 18 inches long. The crossover tubes are 10.5 inches. The total package weighs 4 pounds. It is designed for models with front-mounted controls from 2013 onward. You get parts that help retain heat and protect burners from grease clogging.
Pros
- Includes three 15.3-inch flavorizer bars and three burner tubes.
- Main burner tubes measure 18 inches for even flame distribution.
- Protects burner holes from oil droplets to prevent clogging.
- Compatible with Weber Spirit 200 and Spirit II 200 series.
Cons
- Only fits models with front-mounted controls, not side-mounted ones.
- Does not include ignition components or control knobs.
- Requires manual verification of part numbers for compatibility.
Good fit if
- You own a Weber Spirit 200 series grill with front controls.
- You need to replace worn flavorizer bars and burner tubes.
- You want to restore even heat distribution in your grill.
Skip if
- You have a Weber Spirit 200 series with side-mounted controls.
- You need a complete grill replacement rather than just parts.
- You are looking for a grill with built-in smart features.
Verdict: Grill Valueparts Spirit 200 Replacement Kit is a practical solution for owners of Weber Spirit 200 series grills with front controls who need to replace key heat-distributing components. It directly addresses wear and tear on flavorizer bars and burners.
Specifications side by side
| Spec | Grill Valueparts Spirit 200 Burner and Flavorizer Bar Kit |
|---|---|
| Weight | 4 pounds |
| Color | Spirit 200 Series 2 Burner Enamel |
| Model | REV200303-02KIT |
Frequently asked questions
What is included in the Grill Valueparts Spirit 200 replacement kit?
The package contains three flavorizer bars and three burner tubes. These components are designed to replace worn parts in your Weber Spirit 200 series grill. You receive a complete set to restore proper heat distribution and flavor enhancement. The kit is labeled as a Spirit 200 Series 2 Burner Enamel finish, ensuring the parts match your existing grill aesthetics.
Does this kit fit Weber Spirit 200 grills with side controls?
No, this kit is not compatible with side-mounted controls. It is specifically designed for Weber Spirit 200 series owners with front controls. Models with side controls from 2012 or earlier will not fit this replacement kit. You must verify your control location before purchasing to ensure proper installation and function.
What are the dimensions of the flavorizer bars in this kit?
Each flavorizer bar measures 15.3 inches by 3.6 inches. These dimensions are tailored to fit the cooking chamber of the Weber Spirit 200 series. The size ensures adequate coverage over the burners for even heat distribution. You can rely on these measurements to confirm the bars will align correctly with your grill's internal structure.
How much does the Grill Valueparts Spirit 200 kit weigh?
The total weight of the kit is 4 pounds. This weight includes all three flavorizer bars and three burner tubes. The packaging provides a manageable load for handling and installation. You can expect the components to feel substantial enough to provide durability while remaining light enough for easy transport during setup.
What model number is associated with this replacement kit?
The kit is identified by the model number REV20303-02KIT. This specific identifier helps you locate the correct parts for your grill. It distinguishes this bundle from other individual components or different series kits. You should reference this model number when checking compatibility or searching for additional replacement parts.
Is the enamel finish on these parts durable for outdoor use?
Yes, the Spirit 200 Series 2 Burner Enamel finish is designed for durability. This coating resists chipping and rust, which are common issues in outdoor cooking environments. The enamel protects the metal from heat and moisture exposure. You can expect the parts to maintain their appearance and structural integrity over time with regular use.