Grill Valueparts Spirit 200 Series Burner Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This grill valueparts spirit e 210 grill replacement review covers the Grill Valueparts Spirit 200 Series Burner Kit. It is a direct replacement set for Weber Spirit 200 and Spirit II 200 series gas grills. The kit includes three main burner tubes and three flavorizer bars. The burner tubes measure 18 inches in length. The flavorizer bars are 15.25 inches long. Both components are constructed from stainless steel. This material choice targets durability and resistance to rust. You get a complete set to restore your grill’s heat distribution. The design focuses on fitting models from 2013 onwards with front-mounted controls.
What stands out
- Constructed from upgraded stainless steel for rust and corrosion resistance.
- Includes three 18-inch main burner tubes and three 15.25-inch flavorizer bars.
- Compatible with Weber Spirit 200 and Spirit II 200 series (2013–current).
- Designed specifically for grills with front-mounted control knobs.
- Flavorizer bars protect burner tubes from grease clogging and aid in even heat distribution.
Who it fits
Good fit for
This kit suits owners of Weber Spirit 200 or Spirit II 200 series grills manufactured in 2013 or later. It is ideal if your model features front-mounted control knobs. You will benefit from the stainless steel construction if you want parts that resist rust and corrosion. The complete set allows you to replace worn burner tubes and flavorizer bars simultaneously. This ensures even heat distribution and proper flame performance. It is a practical solution for maintaining consistent cooking temperatures on your two-burner grill.
Who should skip it
You should look elsewhere if your Weber Spirit grill has side-mounted control knobs. This kit is not compatible with models from 2007 to 2012 that use side controls. It is also unsuitable for Weber Spirit 300 series grills, which require three-burner kits. If you need enamel-coated parts instead of stainless steel, check the available variations. Ensure your current parts match the 18-inch burner and 15.25-inch flavorizer bar dimensions before purchasing.
Verdict: This kit provides a durable, stainless steel replacement for Weber Spirit 200 series grills with front controls. It restores even heat distribution and protects burner tubes from grease buildup.
Grill Valueparts Key Specs Explained
Material: stainless steel
This kit uses stainless steel for its burner tubes and flavorizer bars. Stainless steel resists rust and corrosion better than standard materials. It handles high heat without chipping or cracking. You get even heat distribution across your cooking surface. This material choice helps the parts last longer through repeated grilling sessions. It is a practical upgrade for maintaining consistent performance over time.
Burner Length: 18"
The main burner tube measures 18 inches in length. This specific size is critical for fitting Weber Spirit 200 series grills with front mount controls. An incorrect length can cause ignition issues or uneven flame patterns. You must verify this dimension matches your existing part. Proper length ensures the burner sits correctly in the grill box for safe and efficient operation.
Burner Quantity: 3
The package includes three main burner tubes. This quantity matches the standard configuration for two-burner Weber Spirit models. You receive enough burners to replace all primary heat sources in one kit. This eliminates the need to purchase individual tubes separately. It ensures uniform heat output across the entire cooking area for consistent grilling results.
Included Components: flavorizer bars
The kit comes with three flavorizer bars to cover the burners. These bars protect the burner tubes from dripping grease and food debris. They help vaporize drippings to add smoky flavor to your food. They also promote even heat retention across the grill. Including these bars means you replace both the heat source and the protective cover in a single purchase.
Design and Build Quality
According to the listing, this kit uses upgraded stainless steel for its components. This material choice targets durability and resistance to rust and corrosion. You get a finish that withstands high heat without chipping or cracking. The even heat distribution helps maintain consistent cooking temperatures across your grill grates. The flavorizer bars also protect the burner tubes from oil droplets, which prevents grease clogging and allows for a full, even flame. This design helps return collected oil droplets by evaporating them, which can increase the smoky flavor of your food.
The layout includes three main burner tubes and three flavorizer bars. The main burner tubes measure 18 inches in length. Each flavorizer bar measures approximately 15.25 inches by 2.6 inches. The crossover burner tube measures 10.5 inches. This specific configuration is designed for Weber Spirit 200 and Spirit II 200 series grills with front mount controls from 2013 onward. It does not fit models with side mount controls from earlier years. The kit replaces specific Weber part numbers like 7635 and 68949. You should verify your grill’s control panel location before purchasing to ensure proper fit. The stainless steel construction suggests a long-lasting replacement for worn-out original parts.
Setup and Everyday Use Guide
You install this kit by replacing your existing burner tubes and flavorizer bars. The package contains three main burner tubes and three crossover burner tubes. You must verify your grill model before starting. This set fits Weber Spirit 200 and Spirit II 200 series grills from 2013 to the present. It is designed for units with front mount controls only. Do not use this kit on side mount control models from 2007 to 2012. The dimensions are specific. Each flavorizer bar measures 15.25 inches. Each main burner tube is 18 inches long. The crossover tube is 10.5 inches. Ensure these sizes match your current parts to avoid fitment issues. You can also check the replacement part numbers listed, such as Weber 7635 or 68949, to confirm compatibility. Once installed, the stainless steel construction handles high heat without deforming. The flavorizer bars sit above the burners to catch grease. This setup protects the burner holes from clogging. The design promotes even heat distribution across the cooking surface. The bars also help evaporate oil droplets, which adds a smoky flavor to your food. You benefit from consistent flame performance and easier maintenance. The stainless steel material resists rust and corrosion, extending the life of your grill components. This practical replacement restores your grill to optimal operating condition.
Before You Buy This Kit
You need to verify your Weber Spirit model before ordering. This kit fits only the 200 series with front mount controls from 2013 onward. It does not fit side mount controls from earlier years. Check your control panel location carefully. The package contains three burner tubes and three flavorizer bars. You should also gather basic tools for installation. A wrench and screwdriver are typically sufficient. Clean the interior of your grill before installing new parts. Remove any grease or debris from the burners. This ensures proper airflow and even heating. Stainless steel requires occasional cleaning to maintain its finish. Wipe it down after cooking to prevent buildup. This replacement set sits alongside other outdoor cooking accessories in our guide. It is a practical choice for maintaining your existing Weber grill. Consider it if your current parts are worn or clogged. It restores performance without replacing the entire unit. Ensure all listed part numbers match your grill's requirements.
Check before you buy
- Verify your Weber Spirit 200 series has front mount controls.
- Confirm your grill was manufactured in 2013 or later.
- Check that your model is not a side mount version.
- Ensure the burner count matches your grill's two-burner setup.
The product at a glance
Grill Valueparts Spirit 200 Series Burner Kit
Best for: Restoring heat distribution in Weber Spirit 200 series grills
- Burner Length
- 18"
- Burner Type
- burner tube
- Material
- stainless steel
- Burner Quantity
- 3
- Included Components
- flavorizer bars
View on Amazon: Grill Valueparts Spirit 200 Series Burner Kit Affiliate link
This replacement kit includes three stainless steel flavorizer bars and three burner tubes for Weber Spirit 200 and Spirit II 200 series grills. The flavorizer bars measure 15.25 inches, and the main burner tubes are 18 inches long. The set is designed for models with front-mounted controls from 2013 onward. It helps maintain even heat distribution and protects burner holes from grease clogging. You get a complete set of essential internal components for routine maintenance.
Pros
- Made of upgraded stainless steel for rust and corrosion resistance
- Includes three 15.25-inch flavorizer bars and three 18-inch burner tubes
- Fits Weber Spirit 200 and Spirit II 200 series with front mount controls
- Compatible with multiple Weber OEM part numbers including 7635 and 68949
Cons
- Only fits grills with front-mounted controls, not side-mounted versions
- Requires manual verification of compatibility with your specific grill model
- Does not include ignition components or cooking grates
Good fit if
- You own a Weber Spirit 200 or Spirit II 200 series grill with front-mounted controls
- You need to replace worn flavorizer bars or burner tubes
- You want to restore even heat distribution in your grill
Skip if
- You have a Weber Spirit 200 series with side-mounted controls
- You need parts for a 3-burner Spirit 300 series grill
- You are looking for a complete grill replacement rather than specific internal components
Verdict: Grill Valueparts Weber Spirit 200 Replacement Kit provides the exact dimensions needed for Spirit 200 and Spirit II 200 series grills with front-mounted controls. It is a practical solution for restoring heat distribution and protecting burner tubes from grease buildup.
Specifications side by side
| Spec | Grill Valueparts Spirit 200 Series Burner Kit |
|---|---|
| Burner Length | 18" |
| Burner Type | burner tube |
| Material | stainless steel |
| Burner Quantity | 3 |
| Included Components | flavorizer bars |
| Size | '15.25" Flavorizer bars+17.9" Burner |
| Color | Spirit 200 Series 2 Burner Stainless |
| Model | REV190223-7635K |
Frequently asked questions
Does this kit fit a Weber Spirit E-210 grill?
Yes, the Grill Valueparts Spirit 200 Series Burner Kit is designed for Weber Spirit 200 and Spirit II 200 series grills. It fits models with front-mounted controls. The specific dimensions of the 17.9-inch burner and 15.25-inch flavorizer bars match these units. You should verify your control panel location to ensure compatibility.
What material are the burner tubes made from?
The burner tubes are constructed from stainless steel. This material offers better resistance to rust and corrosion compared to standard options. It handles high heat without chipping or cracking. The stainless steel construction helps maintain even heat distribution across the cooking surface for consistent grilling results.
What is the model number for this replacement kit?
The model number for this replacement kit is REV190223-7635K. This identifier helps you confirm the exact product listing. It ensures you are purchasing the correct components for your Weber Spirit 200 series grill. The kit includes the necessary burner tubes and flavorizer bars for a complete replacement.
How many burner tubes are included in the package?
The package contains three main burner tubes. It also includes three crossover burner tubes. These components work together to restore proper heat distribution in your grill. You will need to replace your existing tubes with these new stainless steel units for optimal performance.
Can I use this kit on a Spirit II 200 grill?
Yes, this kit fits both the Weber Spirit 200 and Spirit II 200 series grills. It is specifically designed for models with front-mounted controls. The dimensions of the 17.9-inch burner and 15.25-inch flavorizer bars are compatible with these specific series. Always check your grill's control panel placement before installing.
What size are the flavorizer bars in this kit?
The flavorizer bars in this kit measure 15.25 inches in length. They are made from stainless steel to resist rust and corrosion. These bars sit above the burner tubes to vaporize drippings. The correct size ensures they fit properly in your Weber Spirit 200 series grill for effective heat distribution.