Hisencn Charbroil 4-Burner Grill Rebuild Alternatives: 6 Similar Picks Compared

How alternatives compare to Hisencn

Uniflasy Stainless Steel Burner and Flavorizer Bar Kit

The Uniflasy kit targets Weber Spirit 300 owners rather than Charbroil users. It provides stainless steel burners and porcelain flavorizer bars in specific lengths of 28.125 inches and 22.5 inches. This differs from the Hisencn kit which fits Charbroil Performance 475 models. You should choose Uniflasy if you own a Weber Spirit 300 with side controls. It gives up compatibility with your Charbroil grill. The material is stainless steel, similar to the Hisencn burners. However, the heat plates are porcelain bars. This kit is a direct replacement for Weber components. It does not include cast iron grates or igniters. Pick this if your grill brand is Weber, not Charbroil.

Criditpid 5-Burner Infrared Grill Replacement Kit

The Criditpid kit offers a 5-burner infrared setup for Char-Broil grills. It uses stainless steel construction and infrared heating methods. This contrasts with the Hisencn kit which uses standard 4-burner stainless steel tubes. The Criditpid option requires you to verify dimensions match 14 3/4 inch and 15 1/4 inch specs. It is suitable for Char-Broil 3 or 4 burner rebuilds. You gain infrared searing capabilities but lose the standard burner configuration. The kit includes components for five burners. This may not fit your 4-burner Charbroil Performance model perfectly. Choose Criditpid if you want infrared heat and have a compatible Char-Broil grill. It gives up the exact fit for Charbroil Performance 475 models.

Criditpid 2-Burner Cast Iron Cooking Grates Kit

The Criditpid 2-burner kit is designed for smaller Charbroil Performance models. It includes cast iron cooking grates measuring 17 by 17.5 inches. This differs from the Hisencn kit which covers 4-burner units with larger 18 by 25 inch grates. The Criditpid option provides a complete set for two burners. You gain a budget-friendly solution for smaller grills. You lose the capacity for a 4-burner setup. The material is cast iron, matching the Hisencn grates. This kit fits 2-burner Charbroil units like model 463630021. Pick this if you have a 2-burner grill. It gives up the extensive component list for larger grills. It is best for owners needing simple grate and burner replacements.

GDCERIX Cal Flame Infrared Searing Burner

The GDCERIX burner is an infrared searing burner for Cal Flame grills. It measures 12.5 inches in length, 5.5 inches in width, and 3.4 inches in height. This differs from the Hisencn kit which provides four main burners for Charbroil. The GDCERIX unit is a single burner for a searing zone. You gain targeted high heat for searing. You lose the ability to rebuild the main cooking area. The material is silver and designed for gas fuel. It fits Cal Flame grills specifically. Choose this if you need to replace a side sear burner. It gives up compatibility with Charbroil Performance models. It is not a full rebuild kit for your main grill.

Beurbcikue Ceramic Infrared Sear Burner

The Beurbcikue burner is a ceramic infrared sear burner for side burners. It measures 15.8 inches in length, 3 inches in width, and 3 inches in height. This differs from the Hisencn kit which includes main burners and grates. The Beurbcikue unit is for Nexgrill, KitchenAid, and Jenn-Air grills. You gain a durable ceramic infrared side burner. You lose compatibility with Charbroil Performance models. The material is ceramic, not stainless steel or cast iron. It is designed for searing purposes. Pick this if you need a side burner replacement for those brands. It gives up the comprehensive rebuild kit features. It is not suitable for replacing main burners or grates on your Charbroil grill.

WOOCIT 12-Inch Gas Pizza Oven Burner

The WOOCIT burner is a 12-inch gas burner for pizza ovens. It weighs 3.2 pounds and measures 75 inches in width, 85 inches in height, and 64 inches in length. This differs significantly from the Hisencn kit which is for Charbroil grills. The WOOCIT unit is for propane pizza ovens. You gain a simple replacement for oven burners. You lose all compatibility with Charbroil grills. The fuel type is gas. It is designed for 12-inch pizza ovens. Choose this if you own a pizza oven needing a burner swap. It gives up relevance to grill rebuilds. It is not a suitable alternative for Charbroil Performance grill parts.

Quick picks

Our 7 picks

1 Best overall

Hisencn Charbroil 4-Burner Grill Rebuild Kit

Best for: Charbroil Performance 4-burner grill rebuilds

Burner Length

17 3/4"

Material

Stainless steel, cast iron

Burner Quantity

4

View on Amazon: Hisencn Charbroil 4-Burner Grill Rebuild Kit Affiliate link

This kit replaces worn components in Charbroil Performance 4-burner grills. It includes four stainless steel burners measuring 17 3/4 inches, cast iron cooking grates totaling 18 by 25 inches, and heat plates. The set also provides two igniters and adjustable crossover tubes. You get a complete rebuild solution that restores even heat distribution and rust resistance. It fits specific Charbroil model numbers listed in the product data.

Pros

• Includes four stainless steel burners for even heating
• Cast iron grates provide excellent heat retention
• Adjustable crossover tubes fit 5 to 9.5 inches
• Complete kit with igniters and heat plates

Cons

• Limited to Charbroil Performance 4-burner models only
• Cast iron requires regular seasoning and maintenance
• No remote control or smart features included

Good fit if

• You own a Charbroil Performance 4-burner grill
• You need to replace worn burners and grates
• You want a full rebuild kit for your grill

Skip if

• You have a 5-burner grill model
• You prefer stainless steel grates over cast iron
• You need parts for a different brand of grill

Verdict: Hisencn 4-Burner Replacement Parts for Charbroil is a practical rebuild kit for owners of Charbroil Performance 4-burner grills needing to replace core cooking components. It delivers the necessary burners, grates, and hardware to restore function without requiring a new grill purchase.

2 Also great

Uniflasy Stainless Steel Burner and Flavorizer Bar Kit

Best for: Weber Spirit 300 side control grill owners

Burner Length

28 1/8", 27 3/8"

Burner Type

tube burner

Material

stainless steel

Burner Quantity

3

Dimensions

1 × 1 × 10 inches

View on Amazon: Uniflasy Stainless Steel Burner and Flavorizer Bar Kit Affiliate link

This kit replaces burners and flavorizer bars for Weber Spirit 300 series grills with side control knobs. It includes three stainless steel tube burners with lengths of 28 1/8 inches and 27 3/8 inches. The package also provides five porcelain-enameled steel flavorizer bars. This set is designed to renew your grill without buying a new unit. It fits models from 2005 and newer.

Pros

• Includes three stainless steel tube burners
• Features porcelain-enameled steel flavorizer bars
• Fits Weber Spirit 300 side control models
• Combines burners and heat plates in one set

Cons

• Limited to Weber Spirit 300 series compatibility
• Does not include a regulator or hose
• Requires manual installation without remote controls

Good fit if

• You own a Weber Spirit 300 grill
• You need to replace worn burner tubes
• You want a complete burner and bar set

Skip if

• You have a Weber Genesis or Spirit E-310
• You need a 2-burner replacement kit
• You require a sear zone burner for Cal Flame

Verdict: Uniflasy Weber Spirit 300 Replacement Burner Kit provides the correct stainless steel tubes and porcelain bars for specific Weber Spirit 300 side control models. It suits owners who need a direct replacement for their existing grill components.

3 Also great

Criditpid 5-Burner Infrared Grill Replacement Kit

Best for: Char-Broil 3-4 burner grill rebuilds

Burner Length

14 3/4"

Burner Type

Burner tube

Material

Stainless steel

Burner Quantity

5

Included Components

heat plates, carryover tubes, igniters

Heating Method

Infrared

View on Amazon: Criditpid 5-Burner Infrared Grill Replacement Kit Affiliate link

This kit replaces parts for Char-Broil TRU-Infrared and Medallion series grills. It includes five stainless steel burner tubes, heat plates, igniters, and carryover tubes. The burner tubes measure 14 3/4 inches. The heat plates are 15 1/4 inches wide. You get a full set for five burners, which covers most 3 to 4 burner models. This approach saves you from buying smaller sets separately.

Pros

• Includes five burner tubes for comprehensive coverage
• Stainless steel construction for durability
• Adds extra igniters and heat plates for future use
• Fits Char-Broil Commercial and Signature series models

Cons

• Burner tubes are 14 3/4 inches, shorter than standard 15 inch tubes
• Heat plates are 15 1/4 inches, which may not fit all 15 1/2 inch slots
• Crossover tubes adjust only from 5 to 9 inches

Good fit if

• You own a Char-Broil 3 or 4 burner grill needing full replacement parts
• You want a single kit that includes extra igniters and shields
• Your grill model number matches the listed Char-Broil series

Skip if

• You need exact 15 inch burner tubes for a tight fit
• Your grill requires 15 1/2 inch heat plates
• You only need one or two individual parts, not a full set

Verdict: Criditpid 5-Burner Grill Parts Kit offers a complete replacement set for Char-Broil grills, though you must verify your tube and plate dimensions match the 14 3/4 inch and 15 1/4 inch specs.

4 Also great

Criditpid 2-Burner Cast Iron Cooking Grates Kit

Best for: replacing parts on 2-burner Charbroil grills

Burner Length

15 3/8"

Burner Type

Burner tube

Material

Stainless steel

Burner Quantity

2

Included Components

grates, heat plates, crossover tubes

Dimensions

7 × 5 × 15 inches

View on Amazon: Criditpid 2-Burner Cast Iron Cooking Grates Kit Affiliate link

This kit replaces parts for Charbroil Performance 2-burner grills, including models 463630021 and 463655021. It includes cast iron grates measuring 10.5 by 17 inches and 7 by 17 inches. The set also provides two stainless steel burner tubes, each 15.38 inches long. You get heat plates, crossover tubes, and igniters. This bundle suits you if you need a full replacement set for a smaller two-burner unit rather than a larger four-burner model.

Pros

• Cast iron grates for even heat distribution
• Includes two 15.38-inch stainless steel burner tubes
• Complete kit with heat plates and igniters
• Adjustable crossover tubes from 5 to 9 inches

Cons

• Designed for 2-burner grills, not 4-burner models
• Cast iron requires seasoning and maintenance
• Grates are heavy and bulky to handle

Good fit if

• You own a Charbroil Performance 2-burner grill
• You need to replace multiple worn parts at once
• You prefer cast iron grates for better searing

Skip if

• You have a 4-burner Charbroil grill
• You want stainless steel grates only
• You need parts for a Weber or Cal Flame grill

Verdict: Criditpid 2-Burner Grill Parts Kit is a practical solution for owners of smaller Charbroil Performance models who need a complete set of replacement components. It fits you well if your two-burner unit needs new grates and burners simultaneously.

5 Best premium

GDCERIX Cal Flame Infrared Searing Burner

Best for: Cal Flame grill searing zone replacement

Burner Length

12 1/2"

Burner Type

Infrared searing burner

Material

Stainless steel, ceramic

Burner Quantity

1

Heat Output

15,000 BTU

Fuel Type

Gas

View on Amazon: GDCERIX Cal Flame Infrared Searing Burner Affiliate link

This GDCERIX infrared sear burner replaces the Cal Flame OEM part BBQ07890P. It measures 12.5 inches long and fits Cal Flame G, P, and Convection gas grills. The unit combines stainless steel with ceramic for rapid heat and even distribution. You get one burner per package. It suits grill owners needing a durable searing zone upgrade.

Pros

• Infrared sear burner technology for rapid preheating
• Constructed from heavy-duty stainless steel and ceramic
• Fits Cal Flame G, P, and Convection series grills
• Replaces OEM part number BBQ07890P

Cons

• Sells as a single burner unit
• Limited to Cal Flame grill compatibility
• No included mounting hardware listed

Good fit if

• You own a Cal Flame gas grill
• You need a direct OEM replacement
• You want rapid searing heat

Skip if

• You have a Weber or Charbroil grill
• You need a multi-burner set
• You require non-infrared heating

Verdict: The GDCERIX Infrared Sear Burner delivers targeted high heat for Cal Flame owners. It fits those seeking a precise, durable replacement for their existing searing zone.

6 Best ceramic

Beurbcikue Ceramic Infrared Sear Burner

Best for: Replacing side sear burners on specific grills

Burner Length

14 5/8 in

Burner Type

Ceramic infrared sear burner

Material

304 stainless steel, ceramic

Features

Side Burner

Use

Searing

Dimensions

15.8 × 3 × 3 inches

View on Amazon: Beurbcikue Ceramic Infrared Sear Burner Affiliate link

This ceramic infrared sear burner replaces side burners on select Nexgrill, KitchenAid, and Jenn-Air grills. It measures 14 5/8 inches long with a 3-inch width and height. The unit combines 304 stainless steel with ceramic materials for high-heat searing. You should verify your mounting hole spacing of 6.6 inches before buying. It suits those needing a direct replacement for specific model numbers.

Pros

• Ceramic infrared heating for intense searing
• Constructed from 304 stainless steel and ceramic
• Compatible with extensive Nexgrill and KitchenAid part lists
• Fits Jenn-Air and Better Homes and Gardens grills

Cons

• Specific mounting hole spacing of 6.6 inches
• Only functions as a side sear burner
• Limited to specific brand model compatibility

Good fit if

• You need a replacement for a broken side sear burner
• You own a compatible Nexgrill or KitchenAid grill
• You require high-heat searing capabilities

Skip if

• You need a main cooking burner
• Your grill uses a different mounting spacing
• You want a universal fit for all grills

Verdict: Beurbcikue Ceramic Infrared Sear Burner is a precise replacement part for owners of compatible Nexgrill, KitchenAid, and Jenn-Air grills who need a durable ceramic infrared side burner.

7 Best budget

WOOCIT 12-Inch Gas Pizza Oven Burner

Best for: Simple propane replacement for 12-inch ovens

Burner Quantity

1

Included Components

1 propane regulator hose, 6 screws

Fuel Type

Propane

Heat Output

13,000 BTU

Placement

Outdoor

Application

Camping, Backyard, Tailgating

View on Amazon: WOOCIT 12-Inch Gas Pizza Oven Burner Affiliate link

This WOOCIT replacement burner is designed for 12-inch pizza ovens. It delivers 13,000 BTU of heat, reaching 950°F in 20 minutes. The unit includes a propane regulator hose and six screws for installation. It features a single burner with a simple knob for flame control. You get even heat distribution across the baking stone. This kit suits those needing a direct propane upgrade for their outdoor oven setup.

Pros

• 13,000 BTU heat output for rapid heating
• Reaches 950°F in 20 minutes
• Includes propane regulator hose and mounting screws
• Simple single-knob flame control system

Cons

• Single burner limits cooking capacity
• No multi-setting precision knobs
• Only compatible with specific pizza ovens

Good fit if

• You need a 12-inch replacement burner
• You want a simple propane ignition system
• You prefer direct flame adjustment

Skip if

• You require multiple burners for large batches
• You need precise multi-level heat settings
• You are replacing a non-pizza oven part

Verdict: WOOCIT 12-Inch Gas Burner provides a straightforward propane solution for 12-inch pizza ovens. It fits buyers who value quick heat-up times and simple controls over complex multi-burner setups.

Specifications side by side

Frequently asked questions

See also

• xspc ec6 high performance premix alternatives
• cs unitec part mab 1300 alternatives