Tmozyar 21.5-Inch Hinged Cooking Grate Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This tmozyar cooking grate pk series review covers the Tmozyar 21.5-Inch Hinged Cooking Grate. It is designed for PK Series 300, 3714, and 3611 grills made between 1997 and 2020. The grate measures 21.5 inches wide by 14.18 inches deep. Its key feature is a hinged design. This allows you to lift one side to add charcoal. The raised side locks upright, keeping it off your food. You should measure your grill interior before buying. This ensures a proper fit for your specific model.
What stands out
- Hinged design allows one side to lift for charcoal loading
- Raised side locks in an upright position to prevent food contact
- Compatible with PK Series 300, 3714, and 3611 grills (1997-2020)
- Dimensions are 21.5 inches wide by 14.18 inches deep
Who it fits
Good fit for
You should buy this if you own a PK Series 300, 3714, or 3611 grill manufactured from 1997 to 2020. The hinged feature is ideal if you frequently add charcoal during long cooks. It saves time by letting you lift one side without removing the entire grate. The locking mechanism keeps the raised section secure. Always measure your grill interior to confirm the 21.5 by 14.18 inch size fits your specific unit before ordering.
Who should skip it
Do not buy this if you have a PK300 or PK300AF grill, as it is not compatible with those models. You should also skip it if your grill was made outside the 1997 to 2020 range without verifying the interior dimensions. The grate is specific to PK Series grills. If you have a different brand or a non-hinged setup, this part will not work. Measure your current grate carefully to avoid ordering the wrong size.
Verdict: This hinged grate is a practical replacement for compatible PK Series grills. It simplifies charcoal management with its locking lift mechanism.
Tmozyar Grate Key Specs Explained
Dimensions: 21.5"W x 14.18"
This size matches the cooking surface of your specific grill model. You need these exact measurements to ensure the grate sits correctly inside the firebox. If the dimensions are even slightly off, the grate may not fit or could interfere with the grill lid. Always measure your existing grate before buying to avoid compatibility issues with your outdoor cooking equipment.
Compatible Grill: PK Series 300, 3714, 3611
This grate is engineered specifically for these three PK grill models manufactured between 1997 and 2020. It will not fit other brands or different PK series like the PK300 or PK300AF. Confirm your grill model number before purchasing. Using a grate designed for a different model can lead to poor heat distribution and unsafe cooking conditions on your outdoor grill.
Grate Type: Cooking Grate
This is a direct replacement for the original cooking surface. It sits directly over the heat source to sear and cook your food. Unlike warming racks or accessory grids, this primary grate bears the full weight of your meals. It is designed for high-heat cooking, allowing you to achieve proper char and flavor on steaks, burgers, and vegetables during your outdoor cooking sessions.
Hinge Mechanism
The hinge allows you to lift one side of the grate while keeping the other side level. This feature lets you add charcoal or adjust the fire without moving the food cooking on the stationary side. The raised side locks in place, keeping it off your food. This design improves safety and convenience when managing heat zones on your grill.
Color: Stainless Steel
Stainless steel construction offers durability and resistance to rust and corrosion. This material withstands high temperatures and frequent exposure to weather when used outdoors. It is easier to clean than cast iron and does not require seasoning. Choose this material for a low-maintenance cooking surface that maintains its structural integrity and appearance over many grilling seasons.
Design and Build Quality
According to the listing, the Tmozyar grate is made from stainless steel. This material choice suggests a focus on durability and resistance to rust. Stainless steel is easy to clean and can handle high heat without warping. You can expect the surface to remain stable during long cooking sessions. The finish is smooth, which helps prevent food from sticking to the bars. This makes flipping items easier and reduces the need for excessive scrubbing after use.
The dimensions are listed as 21.5 inches wide by 14.18 inches deep. The height of the grate itself is 1 inch. These measurements are critical for fitting your specific grill model. The grate is designed to sit securely inside the firebox of compatible PK Series 300, 3714, and 3611 grills. It is important to verify that your grill was manufactured between 1997 and 2020. The listing notes that it is not compatible with PK300 or PK300AF models. Always measure the inside of your barbecue before purchasing to ensure a proper fit.
The key design feature is the hinged mechanism. This allows you to lift one side of the grate to load charcoal. The raised side locks in an upright position. This keeps the hot grate off your food and frees up your hand. You can arrange charcoal safely without risking burns. The locking mechanism ensures the grate stays in place while you work. This practical design simplifies fuel management and improves safety during grilling.
Setup And Daily Use Guide
Setting up this Tmozyar cooking grate requires careful attention to your grill’s specific model and year. The product is compatible with PK Series 300, 3714, and 3611 grills manufactured from 1997 to 2020. It is not compatible with PK300 or PK300AF models. Before purchasing, you must measure the inside of your barbecue grill to ensure a proper fit. The grate dimensions are 21.5 inches wide by 14.18 inches deep. This precise sizing ensures the grate sits correctly within the firebox. If the dimensions are even slightly off, the grate may not fit securely. You should measure the original part size before ordering to guarantee compatibility. Once installed, the hinge feature becomes central to your daily cooking routine. The hinge allows you to lift one side of the grate to load charcoal. This raised side locks in place in an upright position. This locking mechanism keeps the lifted section off your food. It also frees up your hand to arrange charcoal without obstruction. This design ensures a safer cooking experience by preventing accidental contact with hot surfaces or food. The stainless steel construction supports this daily use by offering durability and rust resistance. You can expect the material to handle high heat without warping. Cleaning is straightforward due to the stainless steel surface. The hinge mechanism requires no special tools to operate. You simply lift the side to access the charcoal chamber. The lock holds the grate steady while you work. This setup simplifies charcoal management for indirect cooking methods. The product does not include installation tools. You rely on your existing grill structure for support. The hinge provides a practical solution for maintaining consistent heat zones. You can adjust charcoal placement without removing food. This feature enhances control over your cooking process. The design prioritizes functionality and safety during routine use.
Before You Buy This Grate
You need to verify your grill model first. This grate fits PK Series 300, 3714, and 3611 grills made from 1997 to 2020. It does not fit the PK300 or PK300AF models. You must measure the inside of your grill to ensure a proper fit. Older grills may have different dimensions. You should also check the hinge mechanism. The raised side locks upright to keep it off your food. This helps you load charcoal safely. You will need basic tools for installation. You should clean the stainless steel surface after each use. This maintains its durability and rust resistance. This grate is a replacement part for outdoor grills. It does not replace your entire grill. It works alongside your existing PK grill setup. You should compare this option with other PK-compatible grates. Look for similar hinge designs and stainless steel construction. Ensure the dimensions match your firebox exactly. This ensures safe and efficient cooking.
Check before you buy
- Confirm your grill is PK Series 300, 3714, or 3611.
- Measure the inside of your grill firebox for exact fit.
- Verify your grill was manufactured between 1997 and 2020.
- Check that your model is not PK300 or PK300AF.
The product at a glance
Tmozyar 21.5-Inch Hinged Cooking Grate
Best for: PK grill owners needing hinged grate access
- Compatible Grill
- PK Series 300, 3714, 3611
- Dimensions
- 21.5"W x 14.18"
- Grate Type
- Cooking Grate
View on Amazon: Tmozyar 21.5-Inch Hinged Cooking Grate Affiliate link
This Tmozyar cooking grate is designed for PK Series 300, 3714, and 3611 grills made between 1997 and 2020. It measures 21.5 inches wide by 14.18 inches long. The key feature is a hinged design that lets you lift one side to load charcoal. The raised side locks upright to keep it off your food. It is made of stainless steel. You should measure your grill interior to ensure a proper fit before buying.
Pros
- Hinged design allows one side to lift for charcoal loading
- Locking mechanism keeps the raised side upright and away from food
- Stainless steel construction for durability
- Compatible with PK Series 300, 3714, and 3611 models
Cons
- Not compatible with PK300 or PK300AF grills
- Requires manual measurement of grill interior for proper fit
- Limited to specific PK grill series and years
Good fit if
- You own a PK Series 300, 3714, or 3611 grill made from 1997 to 2020
- You want to easily load charcoal without removing the entire grate
- You prefer a stainless steel cooking surface
Skip if
- You have a PK300 or PK300AF grill
- You need a grate for a grill brand other than PK
- You cannot measure your grill's interior dimensions
Verdict: Tmozyar Hinged Cooking Grate for PK Series is a practical replacement for owners of compatible PK grills who need easier charcoal access. It fits well if you value the convenience of a hinged design and can verify your grill model and dimensions.
Specifications side by side
| Spec | Tmozyar 21.5-Inch Hinged Cooking Grate |
|---|---|
| Compatible Grill | PK Series 300, 3714, 3611 |
| Dimensions | 21.5"W x 14.18" |
| Grate Type | Cooking Grate |
| Size | PK99010 |
| Color | Stainless Steel |
| Model | PK99010-1 |
Frequently asked questions
Does this grate fit my PK grill?
Yes, it fits PK Series 300, 3714, and 3611 grills made between 1997 and 2020. It does not fit the PK300 or PK300AF models. You must verify your specific grill model and manufacturing year before purchasing to ensure proper compatibility with your firebox dimensions.
What are the exact dimensions of the grate?
The grate measures 21.5 inches in length and 14.2 inches in width. The height is listed as 1 inch. These precise measurements are critical for ensuring the grate sits correctly inside your grill firebox without interference or gaps that could affect cooking performance.
What material is the Tmozyar grate made from?
The grate is constructed from stainless steel. This material offers durability and resistance to rust during outdoor cooking. Stainless steel is also easy to clean and can handle high heat without warping, making it a practical choice for frequent grilling sessions.
Is the grate hinged for easy access?
Yes, the design features a hinged mechanism. This allows you to lift the grate for easier charcoal access and airflow management. It is a practical replacement for owners of compatible PK grills who value the convenience of adjusting coals without removing the entire grate.
Can I use this grate on a PK300AF?
No, this grate is not compatible with the PK300AF model. It is designed specifically for PK Series 300, 3714, and 3611 grills. You must measure the inside of your grill and verify the model number to avoid purchasing an incorrect replacement part.
What model number should I look for?
The product model number is PK99010-1. The size designation is PK99010. You should check these identifiers against your grill’s specifications to confirm it is the correct part. Using the wrong model number may result in a grate that does not fit your specific grill.