Uniflasy 4-Burner Stainless Steel Grill Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This Uniflasy kit replaces worn components on older Char-Broil Performance grills. It includes four stainless steel burners and matching heat plates. The burners measure 17 3/4 inches in length. The heat plates are 16 15/16 inches wide. This uniflasy grill replacement parts charbroil review covers the key dimensions and material quality. You get adjustable crossover tubes to fit various burner spacing needs. The set also includes two ignitors. This rebuild kit targets owners of specific legacy models who want to restore grill performance without buying a new unit. Check your model number carefully before purchasing.
What stands out
- Four 17 3/4-inch stainless steel burners
- Four 16 15/19-inch stainless steel heat plates
- Three adjustable crossover tubes (5 to 9.5 inches)
- Includes two ignitors for the rebuild kit
Who it fits
Good fit for
You should choose this kit if you own an older Char-Broil Performance 4-burner gas grill. It fits models like the 463342119 and 4633765. The stainless steel construction resists corrosion and heat. You will appreciate the adjustable crossover tubes. They allow you to fine-tune the distance between burners. This option suits you if you want to restore your grill to working condition. It is a cost-effective repair solution for specific legacy models.
Who should skip it
You should skip this kit if you have a newer Char-Broil Performance model. It does not fit versions 463365021, 463365522, or 463352521. It also does not fit Char-Broil Advantage, Commercial, or Nexgrill grills. Do not buy this if your burners are a different size. The kit is model-specific. Always check your grill’s label and compare dimensions. If your parts are different, this rebuild kit will not work for your setup.
Verdict: This kit is a precise fit for specific older Char-Broil Performance grills. It offers durable stainless steel components and adjustable parts for a proper rebuild.
Key specs for this grill kit
Material: stainless steel
The burners and heat plates are made from stainless steel. This material resists corrosion and handles high heat without warping. You get parts that last longer than coated steel. It fits outdoor cooking setups where rust is common. Compare this to carbon steel parts that need seasoning or frequent replacement. Stainless steel stays clean and durable through many grilling seasons.
Burner Length: 17 3/4"
Each burner is 17.75 inches long. This size matches specific Char-Broil Performance models. You must measure your old burners before buying. If your grill needs a different length, this kit will not fit. It ensures proper gas flow across the cooking surface. Other griddles or ovens have different burner sizes. Check your model number to confirm this length matches your unit.
Burner Quantity: 4
The kit includes four burners. This count matches a four-burner grill configuration. You replace all main heating elements in one go. It ensures even heat distribution across the entire cooking area. If you have a two-burner or six-burner grill, this quantity is wrong. Match the number of burners in your grill to this kit count. It prevents gaps in heating or wasted money on unused parts.
Included Components: heat plates, crossover tubes, ignitors
You get heat plates, crossover tubes, and ignitors in the box. Heat plates protect burners from drippings. Crossover tubes connect the burners for even flame. Ignitors help light the gas. Having all parts in one kit saves time. You do not need to order separate items. This complete set simplifies the repair process for your outdoor grill. Ensure all these components match your grill's original design.
Stainless Steel Build And Layout
According to the listing, the Uniflasy kit uses stainless steel for its core components. This material choice resists corrosion and handles high heat. You will not need to replace heat plates frequently, as the construction is designed for durability. The burners measure 17 3/4 inches in length. The heat plates are 16 15/16 inches wide. These dimensions ensure they fit the designated Char-Broil Performance models correctly. You should verify your grill’s original part numbers before purchasing, as this kit is specific to older models. It does not fit newer versions like the 463365021 or 463365522. The kit includes four burners and four heat plates. You also get three adjustable crossover tubes. These tubes can be adjusted from 5 to 9.5 inches. This range allows you to align the gas flow properly across all burners. The layout is straightforward, focusing on replacing worn parts rather than adding new features. You do not get a remote or app connectivity. The design is purely functional. It keeps your existing grill working like new without buying a whole new unit. The stainless steel finish is practical for outdoor use. It withstands weather exposure better than coated alternatives. You can rely on the included OEM instructions to adjust the crossover tubes correctly. This ensures even heat distribution across the cooking surface. The kit is a rebuild solution, not a new grill. It extends the life of your current Char-Broil Performance unit.
Setup And Everyday Use Guide
This kit is designed for older Char-Broil Performance models. You must verify your specific grill model number before installation. The listing notes that it does not fit newer versions like 463365021, 463365522, or 463352521. It is also incompatible with Char-Broil Advantage, Commercial, or Nexgrill lines. You need to check your grill label and compare the original burner, heat shield, and crossover tube dimensions to ensure a proper fit. This step prevents ordering wrong-size parts. The package includes three adjustable crossover tubes. These tubes adjust from five to 9.5 inches. This range allows you to align them correctly with your existing grill layout. The kit also provides two ignitors. You will need to install these into your existing ignition system. The four burners and four heat plates slide into their respective slots. The stainless steel construction resists corrosion and heat. This means you do not need to replace the heat plates frequently. Daily use involves lighting the grill with the new ignitors. The stainless steel burners distribute heat evenly across the 17 3/4-inch length. The heat plates protect the burners from drippings. This setup helps keep your barbecue grill working like new. It is a practical solution if you want to avoid buying a whole new barbecue grill. Just ensure your model matches the compatible list provided in the features.
Check Fit And Parts First
Before you buy, verify your grill model matches the older Char-Broil Performance series. This kit does not fit newer versions like 463365021 or 463352521. You must compare your original part dimensions against the listed sizes. The burners are 17 3/4 inches long, and heat plates measure 16 15/16 inches. If your grill uses different dimensions, this kit will not work. You may need basic tools for installation. The listing includes crossover tubes and ignitors, but you should check if your current ignitors function correctly. This product is a repair solution, not a new grill. It helps extend the life of an existing unit. For those with a fully functional grill, this is unnecessary. It suits owners of older models seeking affordable maintenance. It fits into outdoor cooking setups where replacement parts are hard to find. Ensure you have the correct model number before ordering to avoid returns. This approach keeps your existing grill running efficiently without buying a new one.
Check before you buy
- Verify your grill is an older Char-Broil Performance model.
- Confirm burner length is 17 3/4 inches.
- Check heat plate width is 16 15/16 inches.
- Ensure your model is not 463365021 or similar newer versions.
The product at a glance
Uniflasy 4-Burner Stainless Steel Grill Rebuild Kit
Best for: repairing older Char-Broil Performance 4-burner grills
- Burner Length
- 17 3/4"
- Material
- stainless steel
- Burner Quantity
- 4
- Included Components
- heat plates, crossover tubes, ignitors
View on Amazon: Uniflasy 4-Burner Stainless Steel Grill Rebuild Kit Affiliate link
This kit replaces parts for older Char-Broil Performance 4-burner grills. It includes four stainless steel burners measuring 17 3/4 inches long, heat plates, crossover tubes, and ignitors. The stainless steel construction resists corrosion and heat. The crossover tubes adjust from 5 to 9.5 inches to fit your grill. This set helps restore your grill to working order without buying a new unit. Check your model number before ordering to ensure compatibility.
Pros
- Four stainless steel burners measure 17 3/4 inches long.
- Includes four heat plates made of non-magnetic stainless steel.
- Three adjustable crossover tubes fit from 5 to 9.5 inches.
- Comes with two ignitors and installation instructions.
Cons
- Does not fit newer Char-Broil Performance models.
- Only compatible with specific older model numbers.
- Requires manual adjustment of crossover tubes.
Good fit if
- You own an older Char-Broil Performance 4-burner grill.
- You need to replace worn burners and heat plates.
- You want to repair your grill instead of buying new.
Skip if
- You have a newer Char-Broil Performance 4-burner model.
- You own a Char-Broil Advantage or Commercial grill.
- You need parts for a Nexgrill or universal grill.
Verdict: Uniflasy Char-Broil 4-Burner Replacement Kit is a practical solution for owners of older Char-Broil Performance grills who need to replace key components like burners and heat plates. It fits specific older models but will not work for newer versions or other brands.
Specifications side by side
| Spec | Uniflasy 4-Burner Stainless Steel Grill Rebuild Kit |
|---|---|
| Burner Length | 17 3/4" |
| Material | stainless steel |
| Burner Quantity | 4 |
| Included Components | heat plates, crossover tubes, ignitors |
| Size | 17.45" Burner +16.93" Heat Plate 4pack |
Frequently asked questions
Does this Uniflasy kit fit newer Char-Broil models?
No. The listing states it is designed for older Char-Broil Performance grills. It will not work for newer versions. Specific incompatible model numbers include 463365021, 463365522, and 463352521. You must verify your grill is an older Performance series unit before purchasing. It is also not compatible with other Char-Broil lines.
What are the exact dimensions of the replacement burners?
The burners measure 17.45 inches in length. This is approximately 17 3/4 inches. The kit includes four of these burners. You should compare this measurement to your existing parts. Accurate sizing ensures proper fit within the grill’s burner tube assembly and gas connections.
How wide are the included heat plates?
The heat plates are 16.93 inches wide. This is roughly 16 15/16 inches. The kit comes with four plates to match the four burners. These dimensions are critical for aligning correctly over the burners. Check your current plate width to ensure they sit flush and cover the flame paths.
Is the material stainless steel?
Yes. Both the burners and heat plates are made from stainless steel. This material resists corrosion better than coated alternatives. It handles high heat without warping. This construction helps the parts last longer in outdoor cooking environments where rust and heat stress are common concerns.
Who is this kit best for?
It is best for owners of older Char-Broil Performance grills. You need this kit if your original burners or heat plates are worn out. It provides a practical way to restore grill function. It is not suitable for those with newer models or different grill brands. Verify your specific model first.
Can I use this on a Char-Broil Commercial model?
No. The product data specifies compatibility only with older Char-Broil Performance series grills. It is incompatible with newer versions and other Char-Broil lines. Commercial models often have different dimensions and gas configurations. Always check your grill’s model number against the exclusion list before ordering replacement parts.
What is included in the rebuild kit?
The kit includes four stainless steel burners and four matching heat plates. The burners are 17.45 inches long. The heat plates are 16.93 inches wide. This complete set allows you to replace both the gas distribution components and the flavorizer bars or heat shields simultaneously.